Ga door naar hoofdinhoud

Meta Quest 2 Screen and Lens Assembly Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.

Stap 9 vertalen

Engels
Nederlands
Stap 9
Meta Quest 2 Screen and Lens Assembly Replacement, Reassembly note: stap 0, afbeelding 1 van 3 Meta Quest 2 Screen and Lens Assembly Replacement, Reassembly note: stap 0, afbeelding 2 van 3 Meta Quest 2 Screen and Lens Assembly Replacement, Reassembly note: stap 0, afbeelding 3 van 3
Reassembly note
  • During reassembly, be careful not to trap the twelve cables as you insert the lens assembly into the outer shell:

  • Three cables along the top edge—two flex cables and one LED flex cable

  • Two cables in the top right corner—the battery connector and an antenna cable

  • Two cables along the right edge—an antenna cable and a wide flex cable

  • Two flex cables along the bottom edge

  • Three cables along the left edge—one antenna cable, one flex cable, and one speaker cable

  • You can use a rubber band to help secure the cables out of the way.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.