Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

Meta Quest 2 Speaker Assembly Replacement

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 4 vertalen

Stap 4

Meta Quest 2 Speaker Assembly Replacement: stap 0, afbeelding 1 van 3

Meta Quest 2 Speaker Assembly Replacement: stap 0, afbeelding 2 van 3

Meta Quest 2 Speaker Assembly Replacement: stap 0, afbeelding 3 van 3

Four metal clips secure the inner speaker bracket to the speaker assembly.
Insert one arm of a pair of tweezers under the lip of a metal clip.
Use tweezers to grasp the clip by the lip and pull out the clip from its recess.
These clips can be difficult to pull out because they have a small locking tab on the back. If you have trouble, you can wiggle the clip back and forth as you pull. To get a better grip, use needle nose pliers.
Repeat the process for the three remaining clips.
During reassembly, use the flat end of a spudger to fully press each clip into its recess.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.