Ga door naar hoofdinhoud

Meta Quest 2 Heat Sink Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 2 vertalen

Engels
Nederlands
Stap 2
Meta Quest 2 Heat Sink Replacement: stap 0, afbeelding 1 van 2 Meta Quest 2 Heat Sink Replacement: stap 0, afbeelding 2 van 2
  • Use your fingers to lift the heat sink and remove it.

  • You may feel a bit of resistance. This is normal since the midframe is slightly bonded to the heat sink with thermal paste.

  • You can reuse the thermal paste if you keep it clean. Otherwise, use a spudger to scrape off the old paste and apply a small amount of viscous thermal compound (such as K5 Pro) to the processor.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.