Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

Analogue Pocket Main Board Replacement

Terug naar de handleiding

Engels

Nederlands

Stap 1 vertalen

Stap 1

Analogue Pocket Main Board Replacement, Reassembly information: stap 0, afbeelding 1 van 3

Analogue Pocket Main Board Replacement, Reassembly information: stap 0, afbeelding 2 van 3

Analogue Pocket Main Board Replacement, Reassembly information: stap 0, afbeelding 3 van 3

Reassembly information

Before installing your new board, make sure it has a thermal pad. If the board doesn't come with a pad, follow this step to transfer the old one.
Use the flat end of a spudger to gently lift the thermal pad until you can grab it with your fingers.
If the pad breaks, don't worry. Just transfer each piece to the new board.
Use your fingers to transfer the pad to the new board.
Use the flat end of a spudger to press the edges of the thermal pad until it's centered.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.