Ga door naar hoofdinhoud

Jelly Comb Wirelress Vertical Mouse Disassembly

Engels
Nederlands
Stap 2
Jelly Comb Wirelress Vertical Mouse Disassembly, Remove top plate: stap 0, afbeelding 1 van 2 Jelly Comb Wirelress Vertical Mouse Disassembly, Remove top plate: stap 0, afbeelding 2 van 2
Remove top plate
  • This is the tricky part. There are plastic tabs keeping the plate secure to the body of the mouse under the circuit board. It's not possible to remove the circuit board without removing the plate first.

  • Two of the tabs can be pushed open. They can be hard to see since both pieces are black and it's in a tight spot

  • Once the bottom tabs are released, carefully pry the top of the plate off.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.