Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.
Stap 4 vertalen
Stap 4
Pry up the charging port assembly
-
The top edge of the charging port assembly is held in place with adhesive.
-
Insert the flat end of a spudger underneath the top right edge of the charging port assembly.
-
Pivot the charging port assembly up until you can grip it with your fingers.
[title] Pry up the charging port assembly | |
- | [* |
+ | [* red] The top edge of the charging port assembly is held in place with adhesive. |
[* black] Insert the flat end of a spudger underneath the top right edge of the charging port assembly. | |
[* black] Pivot the charging port assembly up until you can grip it with your fingers. |
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.