Sol Republic Punk Preparing a new battery for Replacement

Vorige stap Volgende stap

Stap 5 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 5

Sol Republic Punk Preparing a new battery for Replacement: stap 0, afbeelding 1 van 3

Sol Republic Punk Preparing a new battery for Replacement: stap 0, afbeelding 2 van 3

Sol Republic Punk Preparing a new battery for Replacement: stap 0, afbeelding 3 van 3

Checking to see if the 4mm strip will fit. There is enough room on the solder pads of the battery control board, to accommodate that size strip.
Clean the contact side of the battery in preparation for the weld of the strip
and clean the strip itself as well

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.