Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 1 vertalen
Stap 1
-
Flip the motherboard and fan housing upside down to find where to disconnect the fan from the rest of the device.
-
Remove the two 11 mm screws using a Phillips #1 screwdriver.
-
Detach the two wires connecting the fan to the motherboard so the fan is now loose inside the housing.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.