Ga door naar hoofdinhoud

Nintendo 2DS Volume Slider Replacement

Engels
Nederlands
Stap 5
Nintendo 2DS Volume Slider Replacement: stap 0, afbeelding 1 van 3 Nintendo 2DS Volume Slider Replacement: stap 0, afbeelding 2 van 3 Nintendo 2DS Volume Slider Replacement: stap 0, afbeelding 3 van 3
  • Use a spudger to pry the back case off by working around the perimeter of the device, starting from the bottom of the 2DS.

  • Don't yank or pull the back case off because the camera ribbon is attached to the motherboard and back case and may rip or damage the cable or camera itself.

  • Use the tip of a spudger, an opening tool, or your fingernail to flip up the small, hinged locking flap on the camera cable.

  • Use your spudger to gently slide the cable out of the connector.

  • Remove the back case.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.