Ga door naar hoofdinhoud

Motherboard Removal

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 4
Motherboard Removal, Disconnect the white coaxial cable: stap 0, afbeelding 1 van 2 Motherboard Removal, Disconnect the white coaxial cable: stap 0, afbeelding 2 van 2
Disconnect the white coaxial cable
  • Use the pointed end of a spudger to pry up and disconnect the white antenna's coaxial connector.

  • Pry under the rounded edge of the coaxial connector, not the straight edge. If you pry under the straight edge you may rip the socket off of the motherboard.

  • During reassembly, make sure to put the cable back in its clip on the motherboard.

  • To re-attach coaxial connectors like this one, hold the connectors in place and gently press them straight down with your finger or the pointed end of a spudger.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.