Ga door naar hoofdinhoud

Motorola Edge (2022) Daughterboard Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 9
Motorola Edge (2022) Daughterboard Replacement: stap 0, afbeelding 1 van 3 Motorola Edge (2022) Daughterboard Replacement: stap 0, afbeelding 2 van 3 Motorola Edge (2022) Daughterboard Replacement: stap 0, afbeelding 3 van 3
  • Use the pointed end of a spudger to pry up and disconnect the black antenna's coaxial connector.

  • Pry under the rounded edge of the coaxial connector, not the straight edge. If you pry under the straight edge, you may rip the socket off the daughterboard.

  • Use the spudger to push the antenna up and away from the phone until the cable is freed from the clip securing it to the daughterboard.

  • During reassembly, make sure the cable's metal band connects to the grounding clip in the daughterboard.

  • To re-attach coaxial connectors like this one, hold the connectors in place and gently press them straight down with your finger or the pointed end of a spudger.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.