Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 3 vertalen
Stap 3
-
Once the lamp housing is removed flip it over where silver pull tab is face down.
-
Use a Phillips #00 screwdriver to remove the 5 mm screw from the right side of the lamp housing unit.
-
Use a Phillips #00 screwdriver to remove the two 5 mm screws from the top of the unit.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.