Oculus Quest 2 Controller Disassembly

Vorige stap Volgende stap

Stap 7 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 7

Oculus Quest 2 Controller Disassembly, Remove Screws From Circuit Board And Disconnect Joystick: stap 0, afbeelding 1 van 1

Remove Screws From Circuit Board And Disconnect Joystick

Now, you need to remove the 4 screws holding the circuit board to the controller.
The joystick has a small ribbon (blue ribbon) as well, but it is easy to connect and disconnect. Flip the latch up to disconnect the joystick ribbon.
You are NOT going to remove it completely, just lift it high enough to remove the joystick.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.