Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.
Stap 3 vertalen
Stap 3
-
Using the Phillips #2 Screwdriver, remove the seven 9mm screws from the top of the device.
-
Using the same screwdriver, remove the three 9mm screws from the back of the device.
-
Using the same screwdriver, remove the one 9mm screw still connecting the small metal clip to the front of the device.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.