Brentwood TS-292B Heating Wire Replacement

Stap 4 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 4

Brentwood TS-292B Heating Wire Replacement: stap 0, afbeelding 1 van 1

Pull the slack out of the wire and pinch the two ends of the wire together.
Gently twist the two ends of the wires together to establish a connection.
Disclaimer: The wires are flat so you will require extra wire if you are not able to obtain enough slack.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.