Ga door naar hoofdinhoud

Canon EOS 20D Secondary Control Board (C-Board 010) Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 1 vertalen

Engels
Nederlands
Stap 1
Canon EOS 20D Secondary Control Board (C-Board 010) Replacement, Disconnect all the labeled cables: stap 0, afbeelding 1 van 3 Canon EOS 20D Secondary Control Board (C-Board 010) Replacement, Disconnect all the labeled cables: stap 0, afbeelding 2 van 3 Canon EOS 20D Secondary Control Board (C-Board 010) Replacement, Disconnect all the labeled cables: stap 0, afbeelding 3 van 3
Disconnect all the labeled cables
  • Disconnect all the indicated connectors by opening their latches.

  • Remove the flex cable that connects the logic board to the secondary control board.

  • Pull the small green connector out of its socket. Be careful when removing it, as it is possible to tear the tiny wires running into the connector.

  • Disconnect the two hidden connectors under the top connector indicated in pink.

  • Disconnect the third hidden connector.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.