Ga door naar hoofdinhoud
Help

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 22 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Make sure the suction cup is firmly attached to the front panel assembly.

While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.

Take your time and apply firm, constant force. The screen is a much tighter fit than most devices.

With a plastic opening tool, begin to gently pry the rear case down, away from the screen, while you pull up with the suction cup.

There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.