Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.
Stap 6 vertalen
Stap 6
-
Remove the static tape covering the two connectors.
-
Use a spudger to disconnect the battery cables from the motherboard.
-
If battery has adhesive, use heat gun for one to two minutes to loosen it. Be careful of the points outlined in red when prying it up. Use guitar picks or a spudger to gently lift the battery and separate the adhesive.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.