Wijzigingen aan stap #4
Bewerken voor Michel_K17 —
Bewerking goedgekeurd door Ennis
- Voor
- Na
- Ongewijzigd
Stap regels
| [title] Remove the speaker end caps | |
| [* black] Remove the twelve screws that hold the two speaker end caps (6 per end) | |
| [* black] ***Re-assembly notes*** | |
| [* black] Align the two holes that are closest together (and pin underneath) to match the chassis holes first to align the entire end cap. | |
| + | [* black] Tighten the six (6) screws per end cap (12 total). Do not over-tighten. |