Wijzigingen aan stap #1
Bewerken voor Xin Chen —
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] *Grip both ends of the Ink Tube Fastener with your fingers, slide it in the direction of the arrow, and draw out the Waste Ink Tube from the Ink Tube. | |
| [* black] *Remove the acetate tape that secure the PictBridge Unit Connector Cable to the Lower Housing. | |
| - | [* black] *Remove the four C.B.P. 3x10 screws and two C.B.S. (P2) 3x10 screws that secure the Printer Mechanism. |
| - | [* black] *Hold the Printer Mechanism by its handling positions with both hands, and remove it from the Lower Housing. |