Wijzigingen in deze stap
Bewerken voor Xin Chen —
- Voor
- Na
- Ongewijzigd
Stap regels
| + | [* black] *Remove Torsion Spring 24.7 from the CR Scale following the next steps: 1. Bring the coil section to an upright position. 2. Push downwards to release foot 1 from the cutout on the Left CR Shaft Mounting Plate. 3. Turn the coil section counterclockwise. 4. Remove Torsion Spring 24.7 from the hole on the CR Scale. |
|---|