Ga door naar hoofdinhoud

Wijzigingen aan stap #6

Bewerken voor bsd

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Use a spudger to flip up the white plastic hinged flap holding the remaining ribbon cable in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.
-[* icon_caution] This flap may be black or white. Be sure you are flipping up the hinged flap, ***not the socket itself***.
+[* icon_caution] This flap may be black or white. Be sure you are flipping up the hinged flap, ***not the socket itself***. Note the position of the spudger in the image.
[* black] Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhone.