Wijzigingen aan stap #14
Bewerken voor Adam O'Camb —
Bewerking goedgekeurd door Adam O'Camb
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Holding onto the downconverter, press |
|---|---|
| - | [* black] Replacement Note: |
| + | [* black] Holding onto the downconverter, press down on the black connector to separate the downconverter board from the logic board. Note: If you are returning the logic board to Apple refer to the parts database and remove the SDRAM, any cables, the modem, theAirPort Card, and I/O panel. |
| + | [* black] Replacement Note: When reinstalling the logic board, make sure the antenna wire is not underneath the board. |