Wijzigingen aan stap #9
Bewerken voor Adam O'Camb —
Bewerking goedgekeurd door Adam O'Camb
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] SDRAM DIMM Before you begin, |
|---|---|
| - | [* black] 1.With a |
| - | [* black] 2.Pull the access |
| - | [* black] 3.Push down on the |
| - | [* black] 4.Carefully lift the |
| + | [* black] SDRAM DIMM Before you begin, position the computer face down, resting the CRT on an ESD mat or other soft surface. |
| + | [* black] 1.With a flathead screwdriver or coin, turn the colored latch counterclockwise on the access door. |
| + | [* black] 2.Pull the access door down to open. |
| + | [* black] 3.Push down on the plastic tabs to release the SDRAM module(s). |
| + | [* black] 4.Carefully lift the SDRAM from the slot. Note: Remove installed SDRAM from the logic board before returning the logic board to Apple. |