Canon EOS 60D Motherboard Replacement stap #2 geschiedenis

-	[* red] Use a plastic opening tool to lift the small ~~black~~ hinge holding the gold ribbon in place ~~at the top of the motherboard. Once the black hinge is lifted,~~ gently slide the ribbon out of the socket.
-	[* red] ~~Once the wire is removed,~~ unscrew the three 4.3 mm Phillips #PH00 screws holding the motherboard down using the PH00 screwdriver.
+	[* red] Use a plastic opening tool to lift the small hinge holding the circled gold ribbon in place, then gently slide the ribbon out of the socket.
+	[* red] Next unscrew the three 4.3 mm Phillips #PH00 screws holding the motherboard down using the PH00 screwdriver.