Wijzigingen aan stap #2
Bewerken voor Jeffrey J O'Dell —
Bewerking goedgekeurd door Jeffrey J O'Dell
- Voor
- Na
- Ongewijzigd
Stap regels
| [* red] Use a plastic opening tool to lift the small hinge holding the circled gold ribbon in place, then gently slide the ribbon out of the socket. | |
| + | [* icon_caution] Use cation, and pull the ribbon straight out. If damaged the camera may not work the same after reassembly. |
| [* red] Next unscrew the three 4.3 mm Phillips #PH00 screws holding the motherboard down using the PH00 screwdriver. |