Wijzigingen aan stap #9
Bewerken voor Marty Rippens —
Bewerking goedgekeurd door Marty Rippens
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Apply mixture over the foam. Do not worry about overflowing slightly onto the board as this will be sanded off. However, do try to avoid runs. | |
| - | [* black] Allow mixture |
| - | [* black] Repeat on other side of board. |
| + | [* black] Allow mixture to cure for 1.5 hours. |
| + | [* black] Repeat on the other side of the board. |
| [* icon_note] You may want to place a piece of tape towards the rail to stop the resin from flowing over the rail. We will glass the rail in the next step. |