Wijzigingen aan stap #1
Bewerken voor bushing —
- Voor
- Na
- Ongewijzigd
Stap regels
| + | [* red] If you have not already done so, disconnect the two bottom-LCD ribbon cables from the main board by prying up the black latches and pulling the cable out to the side. |
|---|---|
| + | [* black] The ribbon cable (marked in blue) for the touch screen is particularly thin and fragile; be careful to avoid bending it more than necessary. |
| + | [* blue] Flip up the latch and remove the touch screen cable. |
| + | [* yellow] Flip up the latch and remove the top-screen ribbon cable. |
| + | [* orange] Pry up on the orange cable to disconnect it from the main board, much like the antenna cable on the Wi-Fi module. |
| + | [* icon_caution] Do not pull on the orange cable that connects to the bottom of the motherboard. |
Afbeelding 1
Geen vorige afbeelding
Toegevoegd
Afbeelding 2
Geen vorige afbeelding
Toegevoegd