Wijzigingen aan stap #3
Bewerken voor Andrew Garris —
Bewerking goedgekeurd door Andrew Garris
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* green] The speaker is connected to the main board by two soldered wires. The location on the circuit board is highlighted in the image on the left. |
|---|---|
| - | [* green] Before you can replace the speaker, you must desolder the wires connected to the old speaker. You can now solder the wires on to the new speaker. The polarity (+ or -) of the wires is not important, so it is okay if you swap them. |
| + | [title] Wires and Soldering |
| + | [* black] The speaker is connected to the main board by two soldered wires. The location on the circuit board is highlighted in the image on the left. |
| + | [* black] Before you can replace the speaker, you must desolder the wires connected to the old speaker. You can now solder the wires on to the new speaker. The polarity (+ or -) of the wires is not important, so it is okay if you swap them. |