Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerken voor Keane Stokes

Bewerking goedgekeurd door Marty Rippens

Voor
Na
Ongewijzigd

Stap regels

-[* black] Using the Phillips #00 Screwdriver, remove the four 6.0 mm screws securing the rear cover to the controller.
+[* black] The plastic shell is held in place by little plastic tabs that snap together.
+[* black] Wedge the plastic opening tool between the shell and the controller and carefully pry off the plastic.
+[* icon_note] Take your time on this step. You do not want to break any plastic pieces.