Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerken voor Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* black] Set the temperature of the air gun on 280-300°C
-[* black] Set the air flow on 1 or 2 (on a 1 to 7 scale)
+[* black] Set a low air flow; 1 or 2 (on a 1 to 7 scale).
[* black] Now, doing circular movement, you have to reflow for 4-5 minutes.
-[* icon_caution] Be careful to reflow only the wifi chip
-[* black] After 5 minutes, set the temperature to 250-260 °C for other 5 minutes
+[* icon_caution] Be careful to reflow only the wifi chip and not any of the surrounding ICs or circuits.
+[* black] After 5 minutes, set the temperature to 250-260 °C for other 5 minutes.