Wijzigingen aan stap #2
Bewerken voor Spencer Pennington —
Bewerking goedgekeurd door Spencer Pennington
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [title] ISSUE: Splitting at the Bottom |
|---|---|
| - | [* black] A common issue is the zipper tape splitting from the bottom after the slider has been pulled up |
| - | [* black] This could be because the pin was not inserted all the way into the box and the sides of the tape are misaligned. To fix this: |
| - | [* black] Carefully unzip the zipper and then check for debris in the zipper box |
| - | [* black] Reinsert the pin into the zipper box, ensuring that it is in as far as possible, and rezip the zipper |
| - | [* black] If this method doesn't work or the slider is missing entirely, it is likely that a [guide|19455|Coil Zipper Slider Replacement|new_window=true] will fix the issue |
| - | [* icon_caution] First, check that Steps 3 - 6 do ***not*** apply to the zipper and then proceed with the slider replacement |
| + | [title] ISSUE: Splitting at the bottom |
| + | [* icon_note] A common issue is the zipper tape splitting from the bottom after the slider has been pulled up. This could be because the pin was not inserted all the way into the box and the sides of the tape are misaligned. |
| + | [* black] Carefully unzip the zipper and then check for debris in the zipper box. |
| + | [* black] Reinsert the pin into the zipper box, ensuring that it is in as far as possible, and re-zip the zipper. |
| + | [* black] If this method doesn't work or the slider is missing entirely, it is likely that a [guide|19455|Coil Zipper Slider Replacement|new_window=true] will fix the issue. |
| + | [* icon_caution] First, check that Steps 3 - 6 do ***not*** apply to the zipper and then proceed with the slider replacement. |