Wijzigingen aan stap #2
Bewerken voor Uchenna Oniah —
Bewerking goedgekeurd door Uchenna Oniah
- Voor
- Na
- Ongewijzigd
Stap regels
| [* icon_caution] Be sure the heat gun is unplugged before starting this process. | |
| [* red] Remove the seven 14mm screws from the side of the drill using a phillips screwdriver. | |
| - | [* icon_note] You will need a screwdriver with a long enough neck to reach into the |
| + | [* icon_note] You will need a screwdriver with a long enough neck to reach into a few of the screw wells. |