Wijzigingen aan stap #4
Bewerken voor Brian Cassady —
Bewerking goedgekeurd door Brian Cassady
- Voor
- Na
- Ongewijzigd
Stap regels
| [* red] Desolder the first solder point connecting the microphone input port. | |
| [* black] After removing all the solder then gently remove the microphone. | |
| [* icon_note] There will be 2 Solders with white lines under the solders and a label of SP these are speaker solders you do not need mess with them for this guide. | |
| - | [* icon_caution] There are resistors near this piece do not |
| - | [* icon_caution] If the device does not feel like it can be removed there |
| + | [* icon_caution] There are resistors near this piece, do not touch them with soldering iron or you will have to put them back in place using the soldering iron. |
| + | [* icon_caution] If the device does not feel like it can be removed there may still be solder on the microphone input. You will need to go back to the previous step. |