Wijzigingen aan stap #19
Bewerken voor Nick Schultz —
Bewerking goedgekeurd door Nick Schultz
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Align the microcontroller with its 44 pads on the circuit board. |
| + | [* icon_caution] Ensure the microcontroller is aligned both vertically AND horizontally. Once multiple pads are soldered, it is extremely difficult to remove the microcontroller and try again. |
| + | [* black] Hold the microcontroller still with tweezers and re-heat the solder from the last two steps to solder it to the board. |
| + | [* icon_note] If you have [product|IF145-113|polyimide tape|new_window=true], you can use it to hold the microcontroller still while you solder the first two leads. |