Wijzigingen aan stap #3
Stap regels
| [title] De-route mains wiring | |
| [* black] To remove the wiring near the mains input socket, lift up the black & white cables over the retaining clip. | |
| [* black] Pull the earth cable down from underneath its retaining clip. | |
| [* black] Repeat this for each cable restraint along the cable route at the bottom of the printer. | |
| - | [* black] De-route the wiring |
| + | [* black] De-route the wiring from the power supply board down to the power switch. |
| [* icon_note] Sliding the ferrite bead (picture 3) towards the top of the power cable frees up more cable to make de-routing the vertical part easier. |