Wijzigingen aan stap #1
Bewerken voor Zachery Friedman —
Bewerking goedgekeurd door Adam O'Camb
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Welcome to |
|---|---|
| - | [* black] This teardown is valid for all M11x, including R1 |
| + | [* black] Welcome to an Alienware M11xR3 teardown. Below, I will describe the necessary tools and steps to disassembling the Alienware M11xR3 with included pictures. |
| + | [* black] This teardown is valid for all M11x, including the R1, R2, and R3. |
| [* blue] 1x Phillips #1 and #00 Screwdriver | |
| [* blue] 1x Flathead Screwdriver | |
| [* blue] 1x Small Needle Nose Pliers or Tweezers | |
| [* blue] 1x Thermal Paste and Some Finger Stalls or in my case small water balloons (to spread thermal paste without getting dirty) | |
| [* blue] 1x Anti-Static Mat | |
| - | [* icon_reminder] It |
| + | [* icon_reminder] It is recommended to read about Static electricity and how it can damage electronic components. |