Ga door naar hoofdinhoud

Wijzigingen aan stap #29

Bewerking door Kane Chauhan

Bewerking goedgekeurd door Arthur Shi

Voor
Na
Ongewijzigd

Stap regels

[* yellow] Pull the speakers connector towards you and away from the I/O board, marked by a yellow square.
[* red] Remove the 3 screws and lift as you see in the picture
-[* icon_caution] Pull the board a little to the left while lifting to prevent damaging the two attached USB 3.0 ports.
+[* icon_caution] Move the board a little to the left while lifting to prevent damaging the two attached USB 3.0 ports.