Wijzigingen aan stap #4
Bewerken voor Kristen Gismondi —
Bewerking goedgekeurd door Kristen Gismondi
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Locate the back of your telescope and notice the 3 pairs of screws with one screw sticking further out than the other in each pair. | |
| - | [* red] Remove the three 19.1 mm lower resting screws from your telescope using a Phillips screwdriver. |
| + | [* red] Remove the three 19.1 mm lower resting screws from your telescope using a Phillips #1 screwdriver. |
| [* icon_caution] While unfastening the 3rd screw, palm the back panel of your telescope so it doesn't fall off unexpectedly. | |
| [* black] Carefully pull back the loose panel exposing the primary mirror and set it aside. |