Wijzigingen aan stap #3
Bewerken voor Enmanuel Mota —
Bewerking goedgekeurd door Enmanuel Mota
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* red] Using a JIS #02 bit, remove second fan by unscrewing both screws. |
|---|---|
| + | [* red] Using a JIS #02 bit, remove second fan by unscrewing both 3.6mm screws. |
| [* icon_note] The most rear screw is held in place by a rubber grommet so it will stay attached to the fan assembly when being removed, but the front most screw isn't held in place so make sure to keep track of it. |