Wijzigingen in deze stap
Bewerken voor Sam Gustafson —
Bewerking goedgekeurd door Sam Gustafson
- Voor
- Na
- Ongewijzigd
Stap regels
| [title] De-solder shutter control flex | |
| [* red] De-solder the connections and lift the flex off the retaining studs. | |
| + | [* icon_caution] Be careful not to overheat the flex circuit. Work in short durations. Allow for cool downs in between if necessary. |
| [* icon_note] This step is not strictly necessary but it will greatly reduce the risk of tearing the flex cable when lifting the mirror box. |