/
Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Lid worden
Inloggen

Wijzigingen aan stap #2

Bewerken voor Ben Campbell —

Bewerking goedgekeurd door Carsten Frauenheim

Voor
Na
Ongewijzigd

Stap regels

[title] Remove fixing bolt for air slot manifold
-[* icon_reminder] If you want to get to the heating elements, you have to remove the top section above the cylindrical part with all of the little vent holes. Everything above the parting line comes off in one piece.
-[* red] Firstly, remove the D-shaped screw cover at the base of the oval by pulling upwards on it. Underneath, there is a T8 screw which must be removed to proceed.
+[* icon_reminder] To access the heating elements, you need to take off the top part that sits above the cylinder with small vent holes. The entire section that is above the separation line can be removed as a single piece.
+[* red] To begin, take off the D-shaped screw cover located at the bottom of the oval by pulling it upwards. Once you remove the cover, you'll see a T8 screw that needs to be unscrewed to move forward.