Wijzigingen aan stap #9
Bewerken voor tayola —
Bewerking goedgekeurd door Alex Diaz-Kokaisl
- Voor
- Na
- Ongewijzigd
Stap regels
| [title] Remove Battery | |
| [* black] Use a heat gun and heat up the front side of the display to loosen the adhesive holding the battery in place. | |
| - | [* |
| + | [* red] Insert a thin , flat, flexible tool to release the adhesive between the battery and frame. Caution is needed here to ensure that the tool does not go through the batter casing. |
| [* black] Work slowly and reheat the front side if the adhesive does not feel as if it is coming loose. | |
| [* black] Work along the side of the battery and eventually it will start to come loose. | |
| [* black] Once one side is free, you can do the same on the other side and should be able to life the battery up and out. |