Wijzigingen aan stap #1
Bewerken voor Corbanizer —
Bewerking goedgekeurd door Carsten Frauenheim
- Voor
- Na
- Ongewijzigd
Stap regels
| [title] Open the case | |
| [* black] Flip the mouse over to gain access to the bottom. | |
| - | [* red] Using a scalpel, pick, or similar tool, peel away the slide pads on the bottom of the mouse in order to expose the three screws |
| + | [* red] Using a scalpel, pick, or similar tool, peel away the slide pads on the bottom of the mouse in order to expose the three screws. |
| [* black] Peel away as little of the pads as possible, in order to preserve the adhesive on their undersides. | |
| [* orange] Using a PH0 / Phillips #0 driver, remove the 3 screws shown in red. | |
| [* black] Gently separate the two halves of the case. Light prying may be required. | |
| [* black] For PCB removal : remove 3 PH0 screws from PCB surface. The whole PCB can be taken out for inspection and repair after the screws are removed. |