Wijzigingen aan stap #4
Bewerken voor Meagan Tobias —
Bewerking goedgekeurd door Meagan Tobias
- Voor
- Na
- Ongewijzigd
Stap regels
| [title] Measure jumpers | |
| - | [* black] Using a multimeter, touch the ground to any of the ground pinouts on the board and measure the JP1 and JP2 jumpers. You should see 12V on the middle and bottom pin of JP1 and 12V on the bottom pin of JP2. |
| + | [* black] Using a multimeter, touch the ground to any of the ground pinouts on the board and measure the JP1 and JP2 jumpers |
| + | [* black] You should see 12V on the middle and bottom pin of JP1 and 12V on the bottom pin of JP2. The top pin of JP2 should be ~ 3.6V |