Wijzigingen in deze stap
Bewerken voor Austin Blakely —
Bewerking goedgekeurd door Austin Blakely
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Find the old composer start device |
|---|---|
| - | [* black] Pull the line cord up when removing the rear panels. |
| - | [* black] Once you remove the rear panel everything will usually be dusty. Use a vacuum or broom to remove the dust. |
| - | [* red] Remove the clip from the top of the compressor start device using the needle nose pillar. |
| - | [* black] Should take around 1 to 2 minutes |
| + | [* black] Remove the rear panel. |
| + | [* icon_note] Pull the line cord up while removing the rear panel. |
| + | [* icon_note] Once you remove the rear panel everything will usually be dusty. Use a vacuum or broom to remove the dust. |
| + | [* red] Remove the clip from the top of the compressor start device using the needle nose pliars. |