Wijzigingen aan stap #5
Bewerken voor Adam O'Camb —
Bewerking goedgekeurd door Adam O'Camb
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Peel away the clear backing from the camera bezel adhesive strip, exposing the adhesive on one side. |
| + | [* black] Very carefully line up the rear camera and flash cutouts on inside of the rear glass with the same cutouts on the adhesive strip. |
| + | [* black] Set the adhesive strip on the rear glass and make sure it does not overlap the edges of the camera or flash cutouts at all. |
| + | [* black] Press the adhesive down so that it bonds to the glass. |
| + | [* black] Peel the green backing away from the adhesive strip. Make sure the adhesive does not come off of the glass with the backing. |