Wijzigingen aan stap #10
Bewerken voor Andrew Optimus Goldheart —
Bewerking goedgekeurd door Andrew Optimus Goldheart
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* icon_note] In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath. |
| + | [* black] Insert the flat end of a spudger between the LCD frame and the metal backing plate. |
| + | [* icon_caution] Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. The plate is screwed down to the rear case, so prying up on it will damage it. |