Motorola Droid X Rear Case Replacement stap #8 geschiedenis

	[* blue] Objective: Remove two small black screws from the back of the phone.
	[* black] Use the Phillips Hex 2mm screwdriver to remove these screws.
-	[* ~~black~~] These two screws ~~are part of the assembly constraints that can be accessed from the rear of the phone. The assembly constraints~~ hold the phone together.
+	[* icon_note] These two screws help hold the phone together.
	[* black] *Using a Phillips Hex 2mm screwdriver, remove two black screws from the back of the phone.*