LG Stylo 3 Screen and Digitizer Replacement stap #10 geschiedenis

+	[title] *** If needed remove the side rails and volume assembly.
+	[* black] If the digitizer is not equipped the side rails and volume button you will need to remove them and reassemble them on your new digitizer. ++Use a flat pry tool and begin on either end of either side of the digitizer. Slowly and gently slide the pry tool between the rail and the digitizer lifting up.++
+	[* black] *Pay close attention to the right side as the volume button will come loose. * Also you will want to remove the volume button flex cable. ++It helps to use a slight amount of heat over the cable to loosen the adhesive. Then use a flat pry tool to carefully remove the cable.++ Reassemble the flex cable, volume button and rails to new digitizer.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd